开云体育

Final question before I put in my order- What antennas are appropriate for an ATV/Motorcycle (not much metal). Will a HT Nagoya NA-771 whip be appropriate?

Dj, What I know about using weather stations on APRS can comfortably be written on a matchbook with a crayon. The two main systems that are APRS compatible are some of the Peet Brothers. and the Davis

We want to setup a remote weather station powered by solar/battery.? I'm looking at the MTT4B-Mini that states in the addendum manual, " for stand-alone battery or solar powered digipeaters, weather

Good time to update the firmware.I can think of 3 options for improvement:1. Ignore the message "Talker ID" ($G?) and look at the 4th, 5th, and 6th characters2. Parse out the 3 common options (all

My use case will be on the amps mount which does include data wiring. From another page(gpscity.com I think…) I understand that the Garmin serial usb cable will work as well if you get a 5pin mini

Garmin certainly does not make it easy to find out about? their products! It looks like you can get serial (RS-232) NMEA out of a Montana if you have the mounting bracket option. otherwise, it

This is for the Montana 700 series. The 600 series appears to be the same, but doesn't give the detail.

Thanks for the link!? Which unit of the Montana species is this spec sheet for? All the units I have checked not only have multi-GNSS, which is a problem for the TT4-based products unless they can be

I was able to dig this up: https://www.gpsrchive.com/Montana%207x0/index.htm * *Garmin Spanner* (Creates a virtual serial port for use with most NMEA 0183 compliant programs) * NMEA Sentences * Status

Bear, If you end up with a Garmin Colorado, would you mind telling us which one you bought, and whether you could turn off the GLONASS sentences? 73, Allen AF6OF

Rob, Thanks for the reply. To be clear, I don’t have the MTT4BT yet, just considering a purchase if it fits my use case. I’ll take a look at the firmware manual as suggested. My uncle works at

Wonder if I just turn off the Galileo will make a difference. Good point though.

Brian - Can you give a better description of what you are having an issue with on your MTT4B and Garmin?From your message, I gathered the issue is waypoints. From Allen's message, it appears you may

Brian, I believe that all the new models of the Montana series all put out the GLONASS sentences. Older units were plain old NMEA serial. If you have a newer unit, you will have to find out how to

I'll find out what it will do. I think I have enough information to dive in. Thanks everyone. ;B [email protected]> wrote:

I just verified that you can switch between banks without a reset.HOWEVER, when switching banks, there is an immediate (okay slight delayed) TX with the new settings.The TT4 does not reset and give

I am looking to replicate what the Kenwood D710 can do with the Garmin system, but in a much smaller package. I want a headless APRS tracking system, with just the waypoints popping up on the garmin.

The hardware manual gives the hardware information.Bank 0 or Bank 1 are referenced in the firmware manual as firmware choices according to BNKMODE. The hardware manual refers to J1 - Radio pin 4 as

Bear, I don't have a TT4 on hand to look at, so I don't know where it is exactly, but the bank switch input should be labeled JP1. You have to allows the TT4 to use the BANK input in the

OK, I'm looking at the TT4 hardware manual and I have yet to figure out what to ground-or-not ... The word "bank" doesn't appear in that document at all. ;B -- Bear Albrecht? W5VZB? OOOTC