开云体育

added a wind sensor but I dont have a good plan for EQNS yet, was troubleshooting some other hardware issues today :/ The voltage will range from 0.4V (0 m/s wind) up to 2.0V (for 32.4m/s wind

I too have be bitten by this issue.? The issue is not a Microsoft issue but rather a Byonics problem.? The cable that came with my recently purchased MicroFox uses the Prolific PL2303TA usb to

Mike - sounds like you had this working, so you know it will work.? I assume you didn't switch the settings when you switched radios, so I would expect your PEET was connected to PortB. I used the

Ive never got my TT4 to work with the peet. The TT3 with the weather firmware works fine but the TT4 is a no go. Gave up on it. Tim/KJ7AZ

Guess I didn't make the problem clear. My doings. My settings are- AMODE KISS BMODE PEET ABAUD 19200 BBAUD 2400 This has been working for many months. When I went to move the jumper which I required

Maybe I am reading your message wrong, but you state: As far as I know, the Peet weather stations output serial text data that needs to go into the TT4. From your description, you imply the Peet is

Howdy; I decided to replace my base radio (HT) with a mobile. Went fine except the radio would just xmit all the time. Read the docs and sway I needed to remove a jumper. Opened the case, moved the

very verbose but I saw this could be a solution to quick fix.

Hello, got some large additions https://github.com/SpudGunMan/MicroTrak-MTT4B-mods a bunch of linux stuff for raspberry use, any input is welcome around any other programs worth adding or windows

I didnt read the subject line I am sorry for more emails

for sure double check I am just a random dude this was my reason for my selection..

I think the FTM-400XDR has a mini-DIN jack that looks like the standard data jack in most radios, but is a proprietary 10 pin connector. I would check with Byon, but I think you are going to have to

don't own that radio but I would bet the *M12P* ( https://www.byonics.com/add_to_cart?cost=19&name=M12P ) - Gets received radio from mini DIN

Thanks.? How about the cable between the radio and the TT4?

Thanks for feedback Rob! I should mention this is working currently you can view k7mhi-1 so I am on to other sensors and the MTT4B currently..?I don't think my use of terms `pull up and down` is

I am a bit confused with your photo sensor example comment. "Testing analog sensor, here we find the given example from adafruit uses a pull up, with values of low lux being high voltage, This wont be

added a lot of chalkboard work, likely overboard but I wanted a turn key document for all things related to this hardware and aprs telemetry to be easy to consume.?updated webpage, and sorry if the

tt-usb https://www.byonics.com/cables

Is there a TT4 cable for between my Windows 11 PC and the TT4?? I currently run an iGate with a Yaesu FT857d and am thinkking of upgrading.? Thanks!

got a lot of updates going on https://github.com/SpudGunMan/Micro-TrakRTGFA-mods with full examples and enough I hope to go crazy! lets see some more ideas shared up for sensors!