Re: Micro Track AIO reprograming
|
Guys, I have a simple question. Our Club has had a Peet Bros 100 and a WX Trax running for several years (K4PAR-1). I believe that several years ago I also had a TT4 running as a WX station (Peet Model 100) and as a digipeater at the same time on my home station. Recently, some of our Club members have asked about a digipeater. Can I use a TT4 for both, replacing the TT3 WX Trax?
Tnx,
Old Hal, K6DPL
toggle quoted message
Show quoted text
Joe,
You cannot program the MT-AIO with a terminal program; you will need to use the TT3 config program:?? Also, you will need to download and install the Prolifics USB Drivers from the Byonics website to use that USB programming cable. Other Prolifics drivers, and Windows Versions older than 10 may require a great deal of heartache and tears. One of the most common difficulties with configuring the AIO is that the serial jack's on units that have not been used a fair bit, may be very tight. Make sure you push the plug in firmly, even having the plug a tiny bit out of battery can deny your serial connection.
73,
Allen AF6OF
On Tuesday, January 23, 2024 at 02:53:58 PM PST, Joe N7IV <ferrara@...> wrote:
I¡¯m working with an older version of the micro trak AIO (version 1.4.4 on circuit board) trying to change the callsign in its program using ¡°Real Term,¡± and I have a failure to communicate.?
I¡¯ve been using the stereo plug to USB adaptor that came with unit.? I¡¯ve identified the proper com port, set the baud rate at 19,200, and turned flow control off.? When I turn on the unit, and hit ESC thrice, no joy.? I¡¯ve not had this problem with either TT3s or TT4s.?
What am I doing wrong?
|
