开云体育

Hi folks,

I have a Tektronix TDS654C that is in need of calibration, as I had to replace a couple of attenuators on the unit. I believe the previous owner must have severely overloaded a couple of the channels, because after the attenuator replacement the unit now works fine. However, a full calibration is in order.

I have everything I need now in order to do the calibration except the TDS600C Field Adjustment Software. I have found the TDS700A, 700C, and 700D, and 500 software on the web, but no luck with the TDS600C. Does anyone have a copy of it or know it is on the web? I've checked the Tek wiki site and the K04bb site as well as others and no luck.

I appreciate the help.

Thanks

Hi ...,
I just sent you the TDS600B software. This may work for you. I am not aware of the availability of the TDS600C software.

Raymond

On Tue, Apr 16, 2019 at 10:46 PM, @Arcticgeek wrote:

I have everything I need now in order to do the calibration except the TDS600C
Field Adjustment Software.

I doubt that the B-model software will work on a C-model.
Reply to me off list and I'll mail it to you.
/H?kan

@Raymond

Thanks for the reply and for sending the TDS600B software, much appreciated.

@Zenith

I have sent a PM to you offlist - thanks again for the reply.