开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育
  1. TekScopes
  2. Topics

TekCATS

 

Hi, it's me again... :)

I was going to go on with the 11302 checking and tried to connect to TekCATS 2.19, but in the meantime I had updated the firmware to the 3.1 version and TekCATS refuses to connect to it.

Has someone a more recent version of TekCATS or must I reinstall the old firmware?
 

On Sun, Feb 23, 2025 at 07:54 PM, Gianni Becattini wrote:


Has someone a more recent version of TekCATS or must I reinstall the old
firmware?
Select 11302A and ignore the error message and it will work.
/H?kan
 

Thank you Hakan,
I tried but its still says “LOG ERROR-> CAN’T FIND EIS RCS VERSION NUMBER”
Actually this is not set and the EIS RCS control variable says NOT SET.
Is there a way to set it?

Il giorno 23 feb 2025, alle ore 20:23, zenith5106 via groups.io <hahi@...> ha scritto:

On Sun, Feb 23, 2025 at 07:54 PM, Gianni Becattini wrote:


Has someone a more recent version of TekCATS or must I reinstall the old
firmware?
Select 11302A and ignore the error message and it will work.
/H?kan
 

Sorry, my fault. It works. I was running in the wrong directory.

Il giorno 23 feb 2025, alle ore 20:23, zenith5106 via groups.io <hahi@...> ha scritto:

On Sun, Feb 23, 2025 at 07:54 PM, Gianni Becattini wrote:


Has someone a more recent version of TekCATS or must I reinstall the old
firmware?
Select 11302A and ignore the error message and it will work.
/H?kan
 

On Sun, Feb 23, 2025 at 09:30 PM, Gianni Becattini wrote:


Sorry, my fault. It works.
It is still important that an 11300 non-A with F/W 3.1 is treated as an A-scope in CATS.



/H?kan
 

THANKS!

Il giorno 23 feb 2025, alle ore 22:35, zenith5106 via groups.io <hahi@...> ha scritto:

On Sun, Feb 23, 2025 at 09:30 PM, Gianni Becattini wrote:


Sorry, my fault. It works.
It is still important that an 11300 non-A with F/W 3.1 is treated as an A-scope in CATS.



/H?kan

1 - 6 of 6