开云体育

Hi Folks,

I made a 3D printed cover for the front of my Tek 7704A. I was worried
about accidentally harming the switches while I move it off/on the
shelf. I could clean it up and share it but that would mean a large
reprint to test it and I wanted to gauge interest before wasting that
much plastic and electricity.

PS: I am planning to do one for the 11801 as well. Though I will
probably have to line that with copper tape or something.

Evan

Will your 7704A cover fit on 79xx 'scopes? If so, I'd be interested in
having several (4 or 5) of them.

DaveD
KC0WJN


On Sun, Jan 12, 2025 at 00:40 evan foss via groups.io <evanfoss=
[email protected]> wrote:

Hi Folks,

I made a 3D printed cover for the front of my Tek 7704A. I was worried
about accidentally harming the switches while I move it off/on the
shelf. I could clean it up and share it but that would mean a large
reprint to test it and I wanted to gauge interest before wasting that
much plastic and electricity.

PS: I am planning to do one for the 11801 as well. Though I will
probably have to line that with copper tape or something.

Evan

Hi Dave,

The 79xx scopes have different geometry on the front panel. The
display is lower down (smart), the power switch is in a slightly less
obvious place, I think the controls might be taller, among many
changes. The 7000 series had a common design style but the geometry of
the front panel and it's layout wasn't very uniform.

It would take a number of thin printouts of the outline to test fit to
make this work or you taking very careful and precise measurements of
some things. Or a 3D scan.

Keep in mind I am not trying to make a business out of this. I just
wanted to share the files and hopefully stop more innocent knobs from
being crunched by accident.

-Evan

On Sun, Jan 12, 2025 at 4:26?AM Dave Daniel via groups.io
<kc0wjn@...> wrote:

Will your 7704A cover fit on 79xx 'scopes? If so, I'd be interested in
having several (4 or 5) of them.

DaveD
KC0WJN


On Sun, Jan 12, 2025 at 00:40 evan foss via groups.io <evanfoss=
[email protected]> wrote:

Hi Folks,

I made a 3D printed cover for the front of my Tek 7704A. I was worried
about accidentally harming the switches while I move it off/on the
shelf. I could clean it up and share it but that would mean a large
reprint to test it and I wanted to gauge interest before wasting that
much plastic and electricity.

PS: I am planning to do one for the 11801 as well. Though I will
probably have to line that with copper tape or something.

Evan

Evan,

Thanks. I have never seen a 7704 so I don't know if a 7704 cover would fit
on a 78xx or 79xx 'scope. I imagine that the only characteristics that
matter would be the outside dimensions of the 'scope bezel and the depth of
the front panel controls.

I'll wait to see what the dimensions of your cover are; at that point I
will be able to decide for myself.

I don't generally have a concern about damaging the front panel controls
but I do wish I had something other than random large plastic bags to keep
dust off of those controls. The same goes for my 547 and 76xx 'scopes.

And, no, I was not expecting you to print covers for me. I can probably
join a local maker shop and print them there.

Thanks.

DaveD
KC0WJN


On Mon, Jan 13, 2025 at 22:13 evan foss via groups.io <evanfoss=
[email protected]> wrote:

Hi Dave,

The 79xx scopes have different geometry on the front panel. The
display is lower down (smart), the power switch is in a slightly less
obvious place, I think the controls might be taller, among many
changes. The 7000 series had a common design style but the geometry of
the front panel and it's layout wasn't very uniform.

It would take a number of thin printouts of the outline to test fit to
make this work or you taking very careful and precise measurements of
some things. Or a 3D scan.

Keep in mind I am not trying to make a business out of this. I just
wanted to share the files and hopefully stop more innocent knobs from
being crunched by accident.

-Evan

On Sun, Jan 12, 2025 at 4:26?AM Dave Daniel via groups.io
<kc0wjn@...> wrote:

Will your 7704A cover fit on 79xx 'scopes? If so, I'd be interested in
having several (4 or 5) of them.

DaveD
KC0WJN


On Sun, Jan 12, 2025 at 00:40 evan foss via groups.io <evanfoss=
[email protected]> wrote:

Hi Folks,

I made a 3D printed cover for the front of my Tek 7704A. I was worried
about accidentally harming the switches while I move it off/on the
shelf. I could clean it up and share it but that would mean a large
reprint to test it and I wanted to gauge interest before wasting that
much plastic and electricity.

PS: I am planning to do one for the 11801 as well. Though I will
probably have to line that with copper tape or something.

Evan

Hi Dave,

I know it seems that simple but I put some internal reinforcement
beams across the top of the bays where the plugins go. I also did one
over the row of controls over that and another L shaped one around the
CRT. I didn't want some impact hitting the cover to have an easy time
bowing the cover in. However, if all you're doing is protecting scope
from dust then you really don't need those. This is why I was so happy
to have a printer that would let me do this in 1 single piece. I kind
of don't want to do a dust cover because then I worry someone might
mistakenly use it to say ship something.

I use most of my scopes too much to worry about dust. The 11801C is a
spare for when the in use one breaks. The 7704A I could probably part
with but I had this problem. It (+ very specific plugin) could have
helped me with +14 years ago which it could have solved.

-Evan

On Tue, Jan 14, 2025 at 12:41?AM Dave Daniel via groups.io
<kc0wjn@...> wrote:

Evan,

Thanks. I have never seen a 7704 so I don't know if a 7704 cover would fit
on a 78xx or 79xx 'scope. I imagine that the only characteristics that
matter would be the outside dimensions of the 'scope bezel and the depth of
the front panel controls.

I'll wait to see what the dimensions of your cover are; at that point I
will be able to decide for myself.

I don't generally have a concern about damaging the front panel controls
but I do wish I had something other than random large plastic bags to keep
dust off of those controls. The same goes for my 547 and 76xx 'scopes.

And, no, I was not expecting you to print covers for me. I can probably
join a local maker shop and print them there.

Thanks.

DaveD
KC0WJN


On Mon, Jan 13, 2025 at 22:13 evan foss via groups.io <evanfoss=
[email protected]> wrote:

Hi Dave,

The 79xx scopes have different geometry on the front panel. The
display is lower down (smart), the power switch is in a slightly less
obvious place, I think the controls might be taller, among many
changes. The 7000 series had a common design style but the geometry of
the front panel and it's layout wasn't very uniform.

It would take a number of thin printouts of the outline to test fit to
make this work or you taking very careful and precise measurements of
some things. Or a 3D scan.

Keep in mind I am not trying to make a business out of this. I just
wanted to share the files and hopefully stop more innocent knobs from
being crunched by accident.

-Evan

On Sun, Jan 12, 2025 at 4:26?AM Dave Daniel via groups.io
<kc0wjn@...> wrote:

Will your 7704A cover fit on 79xx 'scopes? If so, I'd be interested in
having several (4 or 5) of them.

DaveD
KC0WJN


On Sun, Jan 12, 2025 at 00:40 evan foss via groups.io <evanfoss=
[email protected]> wrote:

Hi Folks,

I made a 3D printed cover for the front of my Tek 7704A. I was worried
about accidentally harming the switches while I move it off/on the
shelf. I could clean it up and share it but that would mean a large
reprint to test it and I wanted to gauge interest before wasting that
much plastic and electricity.

PS: I am planning to do one for the 11801 as well. Though I will
probably have to line that with copper tape or something.

Evan

Evan

Just post them. Everyone and is dog expects to have to modify 3D printer files.

TIA

EJP

Evan,

I apologize for the late response.

I can accurately measure the outside of a 79xx outer bezel. The depth of the?control s is something I hadn't thought about.

I started looking for a Maker Space here in Titusville. There are a couple of places in Titusville purported to have tools, but they don't look promising. There are definitely some within an hour and a half's drive; I may have to join one of those. Or maybe I should start one here (after all, this IS, or was, a tech town).

Coming up with dust covers for my 'scopes has a in the back of my mind for a long time. It is not, currently, a priority, but it would be useful to identify a solution, which is why I sent my original enquiry.

Thanks for your time.

DAveD

--
This email has been checked for viruses by Avast antivirus software.
www.avast.com