My TDS5034B boots up with a message that TekVisa is not found. After dismissing the message the scope appears to run normally. Tiring of the nag at bootup I decided to find and install TekVisa. The current versions of this software available on the Tektronix site, V4.1.1 and V5.11.1 both state in their prerequisites that my version of OS, Windows 2K, is not listed. I thought that perhaps because Windows7, 8, and 10 were all included that the installation would be allowed. When the install is attempted the screen shows a notification that it is about to be installed and asks for the user to click "Next". The problem is there is no "Next" to click on displayed. I tried an external monitor thinking that maybe it was a resolution issue but there is no "Next" there either. I cannot scroll the screen in any direction. I changed the resolution of the LCD and re-booted. After that I was able to scroll but the "Next" was still not visible so I reverted back to the native resolution. Any Ideas on how to install TekVisa without clicking the "Next" or how to find the button?
Thanks, Ferrous
PS Although there are a lot of bells and whistles on the 5034B I do not like to boot up delay time. I like the color aspects of the display but my TDS460 has slightly better bandwidth, uses standard probes, and powers up faster.
zenith5106