开云体育

Hi, I am selling my Tektronix 7613. The scope works perfectly fine. I have uploaded some photos to imgur.

The 7613 itself has some missing parts, which inlide the plastic bezel, and metal blue plastic filter holder. The plastic bits of the readout intensity and beam intensity is missing, but they work.

It's obvious in the images. Other than that, nothing else is missing.

The selling offer is, one fully functional 7613, a horizontal plug in of your choice, and if you pay an extra $10, you get a 7A26.

The choices for the horizontal plug-in are a 7B53A(see notes), or a TD-1085/U(fully funtional)

Notes: 7B53A is faulty, this is due to the B-Sweep cam not acruating the B-sweep shaft. This is likely due to brittle plastic that has broken down over time. A sweep still works perfectly fine.

B-sweep does work, it's just a mechanical issue. As seen in photos, mixed sweep still works.

Also the trigger source select knob on the 7A26 has broken off.

Images:

Located 95608 Carmichael CA, USA.

Hoping to sell for maybe $130? Will consider trades.

I've fixed the cam in the 7B53A.

The 7B53A is fully functional now; you will have to be more careful with it though as the repaired part is more fragile than others.

If you're not in the area you can have it shipped, though if it is shipped, I cannot guarantee it's operation upon arrival. I will do my best to pack it.

Like with my other post, will consider trades for a 3D printer. Need one for an upcoming school project.