开云体育

Good point! ?I wasn't really thinking. ?They likely are mostly silver since they tarnished black. ?Nickel will probably go greenish (or perhaps that's from the copper underneath that oxidize on a

Hi Dan. On all the TE I have, the connectors appear to be Silver plated. You could (!) carefully clean them with "Tarnex" liquid. Then clean off that stuff with Windex, etc. Most of the time, I simply

Hi folks, ? I am sure this has been asked before, so please point me to the correct links if so. ?A quick search of the archives didn't find anything easily. ? How does one clean the nickel-plated

Very nice!

Thanks for that Mark. Another tool in the box. Dave Sent from my iPhone

On page xx of the preface: http://w140.com/logichandbookmar67_tek567.jpg

I have these almost since they were new and now need to find a good home for them both. The tubes are good nice sharp traces, but the 585 needs a HV cap replaced, and the 535 is slow to warm up..I

I would be happy just for some power good L.E.D,S and maybe test points for the transistors. Regards Dave

I tried responding and got a message from yahoo.com saying account disabled or discontinued.

Hi Chris, You are almost there. Pl read page 3-45 which explains how the circuit operates. Put the large 87 volts schematic in front of you. Look at resistor R1228 and R1227. Check that they are

Ok, I replaced Q1221, Q1222 and Q1223. I also verified R1212 while I had it out. Still no go - I tested all 3 transistors with my DMM and they all look like they're good. Where do I go from here?

http://kayseriarackirala.com/zr/3iikaveycbdsx38s4zaij=9j35uuzt7ve1c73s9 albert prazolam

==================== Which One? There are three: ? The 1st one Tek made has no Tek part number on it but it does say on the front panel: High Amplitude Pulse Generator. This unit has a Step

Ah, I didn't realize they were that similar; I was interested in the first one (no part number). -Dave

PG505 ( 80V) and the 106 ( >120V unterminated) pulsegenerator are both also high amplitude pulsegenerators. Fred PA4TIM

Which One? There are three: · The 1st one Tek made has no Tek part number on it but it does say on the front panel: High Amplitude Pulse Generator. This unit has a Step Attenuator, Variable Amplitude

Just wondering if a manual/schematic is "out there" for the Tek High Amplitude Pulse Generator. -Dave _,_._,___

http://ecosensory.com/tek/TM500-proto-sketch-1.gif is a little thought sketch about blank TM500 plugin frames and face-plates that are easy to fab.

I have no affiliation with the seller. http://seattle.craigslist.org/kit/ele/3634202735.html -Kurt

I've had some time to read the manual and play with the 'scope. It seems to work. I am pleased with the deal. I've figured out most of the front panel button functions. I'll need to get a waveform