开云体育

Look closely at U2420A pin 2 and the lead on C2422. Your readings do not make sense there. Got any track damage? Regards, Tom

Bert, There is free software that is much better than this which will take measurements of R, L, and C using your PC sound card called RCL-meter. It can measure - capacitances (5pF to 5uF) -

Hi Bert, They are the same in any of the 400 series scopes. Be delighted if you had two. Many thanks Jim

Agreed. I was honest when I dealt with them and at one point sent back a piece of gear I had put a ton of time and money into (which they do NOT reimburse you for). It was said to have a condition

Ok Folks, In the photos section i put a few pics of my 2465B - A5 board - U2420 Testing. http://groups.yahoo.com/group/TekScopes/photos/album/349791750/pic/list

You can get a copy of the 465M manual from here: http://www.ko4bb.com/manuals/index.php?dir=Tektronix/Tektronix_-_465M_Oscilloscope The 465M is a good 100 MHz analog scope that won't let you down.

Sorry for the spelling error and thanks for the correction. Thanks to all for answers to my question about probes. I obviously have much to learn about this scope and I am searching for a manual or

After many years of reading technical publications one of my most interesting "finds" is the following from EDN magazine ( edn.com ): // Cheap and easy inductance tester uses few components

Isn't it really strange that they decide only some time after you get the item that they shouldn't have sold it? Seems a bit late... I've read about destruction of sensitive equipment once, they even

How about the 465M? If so, I may be able to help.

I'm not current on the regulations, but I recall some items being flagged "non-export" or similarly restricted, and requirements for documentation of any future resale.? They wanted a Tek specan back

Oh yeah, last batch of those were "found" after I asked nicely the guy at Vernonia. There are equivalents, in plastic through. These are?scarce?because they have been used in so many?devices,

The unblanking signals from the A and B sweeps are combined in the horizontal display switch (SW530 5R and 5F located on schematic 2). I would start looking for a problem there. Does wiggling that

Hello, Craig and the group-- Craig's (and others') correction is absolutely, well, correct<g>. I apologize for any confusion that I may have introduced. I was thinking of the business end of a probe

It's "Tektronix", BTW.

Hi, ? I can understand how this could happen, but I wonder if it is more stories than not. ? Several decades ago I worked in the surplus electronics buiness and we did a lot of gov't bidding as did

Hi, ? I am not an official, so it is best to go to the site for the rules and regulations. ? In general: ? The items need to be picked up - they do not ship Any tenchnology-related items often has

No. The spring loaded pin is to automatically change the range to x10 on scopes that have this feature. Craig

Yes - or simply that the probe is a 10X or 100X if it is not switchable. -ls- Pat-W9ZO <malfam2@...> wrote:

Hi All, This is probably a long shot, but I have a 2710 Ebay special with a defective transformer in the primary side of the switcher - T290. I bought this a year or so ago, and decided to take a look