开云体育

Would this help:? http://www.robotroom.com/Color-PCBs-5.html A dissolveable IC socket.? I do remember seeing somewhere a carrier of sorts that has just the pins. So, you can solder either side and

That would be a sound option, thank you. On balance after reading all the replies, I think I'll probably just use the first of the items I listed in my original mail. Dave

No idea, but that's the way it looks. BTW Rollyn pointed out that there's apparently no difference, it's on the web site, I just missed it. There are three listed for some reason. Slight. From

Hi John, Thank you for that comprehensive reply. Regards, Mark

Dave, have you got any old wire wrap IC sockets? I have used them in the past for exactly this purpose, but I have to be careful which type of DIL socket I use on the MB as the pins are square for

probably help export No, not in general. Pretty much everything exported from the US is "subject to export control," but a Tek 494P doesn't require a license unless you are on a list of prohibited

Sorry I took so many days to answer but I was away. I'm delighted others have found a use for the SOT23 curve tracer test fixture. I especially like the creativity others are employing to

Hi Raymond, I own a 2465A and 2467. At least with those models, there is only one fan speed as there is no thermostatic control. I do not think the fans are very noisy and the amount of air flow is

Check the input attenuator in all positions to be sure it tracks -- Dave& Lynn Henderson Manuals@... www.Artekmedia.com PO Box 175 Welch,MN 55089

Hi All, I am interested in getting a Tek 21GHz 494P (possibly from eBay), and probably will need international shipping to New Zealand. I wonder if you guys can help with a succinct list of issues

Hi all, does anyone have a spare/unused 7xxx series rack mount scope they dont need.I only require the mainframe,no plugins are needed as this unit will have a custom plugin designed to display x-y

Hi Gordon, Everywhere I have ever lived and worked, Rev B came AFTER Rev A. Why would they name things in reverse alphabetical order? I don't recall seeing a choice at the time I ordered it. Do you

Hi Max, This makes contacts A37 and B37 suspect. Remember this is a first check. The fault could also be in a readout board channel selector IC for instance. Albert

Hi, The following has been sort of haunting me for a while: When I switch on my 2445B, the fan starts running at a low speed and is barely audible. After a while, it increases its speed to what I

My Tek 2235 has a problem, The input signal on Ch1 also is displayed by Ch2. This occurs whenever CH2 is displayed (Both or CH2 only) . It occurs even if Ch2 input is set to DC, GND or AC. When I

Hi Albert, thanks a lot; just tested the following: I have 2 pcs. 7A22, 1 pc 7A26, 1 pc 7B53A, 1 pc 7B85. The 7A26 in left position shows both channels ok, in centre position only CH2 (bottom

Thanks for confirming that resource. I was hesitant without knowing if it was true or replacement parts. I ordered the part, so I should receive it sometime this next week. Now I just need to source

2N4931 Vernonia northern is an excellent resource. They are real Tek parts. Tom

10-4. Thanks. I didn't realize it had been broken down so far. In hind sight, I likely should have though. In any event, I suppose it may be obvious that I have done the bone head thing in the past

Hi Max, Did you read the other readout problems thread, concerning a R7903? Very informative and you might have a similar contact problem. First of all put a dual channel vertical amplifier (like