Hi Max,
This makes contacts A37 and B37 suspect.
Remember this is a first check. The fault could also be in a readout board channel selector IC for instance.
Albert
toggle quoted message
Show quoted text
Hi Albert,
thanks a lot; just tested the following:
I have 2 pcs. 7A22, 1 pc 7A26, 1 pc 7B53A, 1 pc 7B85.
The 7A26 in left position shows both channels ok, in centre position only CH2 (bottom middle position readout) ok, CH1 (top middle position) no readout.
7B53A and 7B85 timebases show no difference (except additional 7B85 readout bottom right).
It seems to be the problem of the backplane-connector you mentioned.
Did you read the other readout problems thread, concerning a R7903?
not yet; have not known it yet.
Max.
