开云体育

Hi Jerry- I am using an old analog lens on a modern digital camera. Generally, any of the big camera "systems" can use their older lenses with their modern camera bodies having similar mounts, but

Thanks Dave and Steve! Curious, did Tek not put their name on the first probes, or am I missing the tip which would have had the Tek name on it? I looked around in the case more and found that the

Hi Stan, I have a faulty TAS250 which has a slow/dodgy vertical change switch on both channels, and I suspect dodgy/dirty relay contacts for the two vertical range-select selection. The front panel

Hi Tom, Thanks for your mail. I popped the case off and probed the points and found the voltages were all in tolerance. Excellent. I'll use it to assist in fault finding / audio design. Many

The behavior of your scope directly depends on the accuracy of your low voltages and their ripple levels, so have a good look at your low voltages before you come to any conclusions. Give the

That would be a nylon screw, not teflon. It secures the head to the body - removing it and the Allen setscrew(s?) at the cable end allows you to slip the body back and expose the attenuator, as Steve

Yeah, it looks like the idiot script kiddies at yahoo are up to their usual mischief. Also, you lose the links from the subject to the digest body. I had to switch all my groups to single emails and

I did a cursory look through the manual for this but didn't see anything. Quite a lot of info there so may have missed it (if it's even there). I just wasn't sure if an off-centered auto trace might

Jerry, Looking for Knob grey 366-1299-00 Volt Select (7A26 etc) Bob

Hi, If you can find 3 knobs Volt/Div of the 7A18(A), 7A26, a plastic CRT frame ?(7704 etc.) part number: 426-0514-00 and a CRT filter ,blue and/or brown ( 7704. 7603) part no: 378-0625-00, you could

Hi, As parts of the continuing saga of moving from my little country home to the wife's digs in town I has uncovered a stash of 7K guide rails. They appear to be 352-0181-0?( for 4 bay models) and

Hi all Why have my email digests in this group started appearing as one word per line in a column umpteen lines high on the LHS j o n a t h a n

Hi, I don't know what that stuff is but I admire the photos. My Finepix 5000 will not focus near that close. What kind do you use? Jerry Massengale

I tried your setup on a 465B, and the AUTO trace was within one small division of being centered. I can't see why it would matter to me where it was on the screen, other than to please my symmetric

This past weekend I bought a 310A in a leather carrycase with several probes and probe accessories. Nice! The 310A will be a future project- haven't even tried to power it up yet. Included several

If I turn both channels off, I get a "free running" trace. This trace is not vertically centered. Is it supposed to be centered? If so, is there an adjustment for that and where is

Here's what I got for voltages. Values in brackets are what is printed on the schematic. Q102e: +4.84 [-4.7] Q102b: +4.12 [not printed, but assumed about +4.3] Q102c: -3.45 [-4.2] Q103e: +4.53

Thanks Curly- doubt I'll ever need to put one in there but interesting anyway! Cheers DaveB, NZ

<daviddigiacomo@...> wrote: