I did a cursory look through the manual for this but didn't see anything. Quite a lot of info there so may have missed it (if it's even there).
I just wasn't sure if an off-centered auto trace might be indicative of other possible problems.
Thanks,
Barry - N4BUQ
toggle quoted message
Show quoted text
--- In TekScopes@..., "Tom Jobe" <tomjobe@...> wrote:
I tried your setup on a 465B, and the AUTO trace was within one small division of being centered.
I can't see why it would matter to me where it was on the screen, other than to please my symmetric mind.
A look at the service manual may show you if an adjustment is available for this issue.
Nice scope that 465B!
tom jobe...
----- Original Message -----
From: Barry
To: TekScopes@...
Sent: Monday, July 02, 2012 6:25 AM
Subject: [TekScopes] Question regarding 465B "free running"
If I turn both channels off, I get a "free running" trace. This trace is not vertically centered. Is it supposed to be centered? If so, is there an adjustment for that and where is it?
Thanks,
Barry - N4BUQ
