开云体育

A renewed search of my Digikey catalog has part number 381N505-ND. ($13.35). This is a Clarostat 1 Watt conductive plastic linear pot with identical mechanicals to the original, which was also a

Lubricate the shaft where it enters the body of the pot with contact cleaner. Turn the pot. Repeat as necessary. You will probably find it only takes one or two tries to get enough penetration to fix

Yes it is worth doing because I tried just one mispelling and found a scope. Here's the link: http://cgi.ebay.com/ws/eBayISAPI.dll? ViewItem&item=3802275078&category=45005 regards, Benoit it.

Hi all! I am in need of a new "focus" pot for my Tektronix 475 scope, serial number B278849. The part Identifier is R1380. The Tek part number is 311-0075-00. Description is: Res., VAR, NONWIR: 5M

Greetings All, I would like to inquire if anyone in this fine group of ours has a CRT for a Tek 2235, or 2236 for sell, or trade. The part number on the CRT is 154-0861-00. I received this 2235 from

<mister_twister@p...> wrote: called "Tectronics". ---------- There is actually a real company which spells the name just like Christian initially did. It's in UK and deals with home

In the movie, "Diamonds Are Forever" they have a company called "Tectronics". I believe I have it spelled the way they have it in the movie. I'm to lazy to pull out all my James Bond movies (and I

I used to have a standard eBay search that included a lot of the common mistakes. Here's 20 to get y'all

Change all the filter caps in the power supply - they are getting old and worn out - that will fix it! Always use 105C rated caps as they last much longer (the last ones worked for 20

has anyone seen this when the scope is first turned on and a signal applied there is what looks like ac ripple on the top of the trace but after a minute or so it gradualy shrinks and goes away

(Data I/O), so much more reason to be careful. Possibiliies are infinite and have to watch for fine print (manufacturer, IC revision, algoritham revision etc.), or you will fry the

I did not bid against you, but not for lack of want, it was a lack of opportunity. Regards Miroslav Pokorni

Hi All, If the 2716 is a problem, you might want to go for the CAT28C16 EEPROM This one is pin-compatble and still avalable from Catalyst (or any other 28C16 which you can get) Fred de

Hi, Miroslav, * REPLY SEPARATOR * <g> Programming is the least of my worries. When Data I/O designed the Unisite, they designed it to be 'pin driven.' This means that each pin

Greetings,.....nuts!!!......just when I find an item that slipped past most..........there will Miroslav bidding against me!!!!! I have another good search secret tip.........but it's

Interesting and good price rare item lurking on eBay at the moment. A 7514 storage scope - I had no idea that Tek did split screen storage into the 7000 series until I saw this. 90MHz

I worked for a company called Scientific Generics at one stage, and received a letter from a pharmaceuticals company addressed to Cystic Genetics. Sounded very painful to me... Craig

It seems even worse than my name. I've had main come to Sawyer, Saywer, Saywers, Saunders, Swyear, Sowear etc etc. My off the cuff reply when someone on the phone asks how to spell my name is to say

Oh, 2732 will work, just make sure that un-used address bit (A11, pin 21) is nailed down, so that it is lower half of PROM that is read. As for 2764, that is a different proposition because it is 28

That is pretty good tip, I never tried it, but it is worth doing it. Regards Miroslav Pokorni