开云体育

Would anyone have a type 012-038 or 012-0038-00 extension cable that you would be willing to sell? I have an extender board but because of available space I would have to do quite a bit of heavy

I found the 7A16P had a problem. The 50 ohm internal termination function didn't work due to its reed relay contact going bad. I had to take it all apart to figure out, then put back together, then I

The uploaded zip file contains these app's: OSSA.BAT STARTUP.BAT TDSCEM1.APP TDSEYE1.APP TDSJIT1.APP TDSPRT1.APP

The uploaded zip file contains the JAVA apps: OSSA.BAT STARTUP.BAT TDSCEM1.APP TDSEYE1.APP TDSJIT1.APP TDSPRT1.APP I gifted myself with a refurbished TDS784D last year from an excellent Tek scope man

The following items have been added to the Files area of the [email protected] group. * /TDS700_HD.zip ( /g/TekScopes/files/TDS700_HD.zip ) *By:* jspencerg <jspencerg@...>

Does "demo" signify that these aren't full versions?

The seller replied and is asking US$125 plus postage for a CD of all the software he has. TDSRBS1: Rambus Channel Error and Signal Level (RSL) Measurements WFMSAVER: Waveform saver utility TDSPSM1:

Just thought I'd report this in case people don't know about it. I got a couple of 7A16P plug-ins years ago, and found that they really were intended to go with the 7912 and such transient digitizers,

Have you tried H?k?n for the one you're missing? (Hope I got those accents correct).

Hi Jaap Thanks for getting back to me. When I do factory default I get the normal screen but with no noise floor and message uncal, Freq norm suggested (Find Side). I go to normalisation menu.

[email protected]> wrote: Awesome, I've always wondered about those, though the power application looks by far the most useful.

Forgetfulness mostly.... :D It will be uploaded soon! Jared

Is there any reason you haven't uploaded what you do have here or at the wiki? If these are hard to find, you should be sharing them widely and getting them out there so that they don't disappear.

Hi, I'm still looking for the Power Analysis software, TDSPWR1, or any others that anyone might have. I almost got my hands on a good set of software with a HD option, but the ebay seller didn't seem

Hello Andy, I have some of these 2712 analyzers. As far as I know this Diplay Storage Board memory is only for stored displays (A,B,C and D) and saved settings. I would like to know what settings you

The silicone grease I use for plastic parts (mostly gears, some cams) is the Dow Corning 160. I've had the same tube for at least 10 years with no separation - always like Vaseline consistency. If I

How are the cams fixed to the shaft? From a distance it looks like those cams could be 3D printed, even with a reasonable FDM printer. [email protected]> wrote:

I'm presuming those cams are plastic(?) and idly wondering how you managed to solder the wire loops without turning them melting? (at least the loops looked like they were soldered.) <No, I don't have

What is the go to grease for these things? Is there a concensus on what's best to purchase if you don't already have something on hand? So far, I've seen GE G300 (silicone) and Dow Corning #160. Are

I have put up some pictures here /g/TekScopes/album?id=297937 The captions briefly explain the deal. Ed