开云体育

I've got a Keithley 2015THD DMM, and I also have a basic Keithley 2000 DMM. I've also got one of the Keithley 2200 programmable power supplies plus another 2200 that needs to be repaired. I usually

Thanks, I saw those but unfortunately I have a 575 which doesn’t have the step gen output banana plugs on it like the 576/577/370. I do have an eico 667 kicking around that I don’t use anymore

I have some extra's PCBs that I designed and had made. They are based upon Dennis' (and ChuckA's) design. You can see pictures of the finished unit here:

I have a 179 as my shop DMM. It is the only instrument I own which goes to the cal lab. -- Dale H. Cook, GR/HP/Tek Collector, Roanoke/Lynchburg, VA https://plymouthcolony.net/starcity/radios/

On Sat, 4 May 2024, Ilya Tsemenko wrote: It's interesting -- I also have 263 waiting in queue for refurbishment and calibration as well as several 237 and 238 SMUs and couple of 6517A units :) Almost

<+1> I love Keithley's and repaired quite a bit of them, mostly DC/LF stuff. Actually have 263 on bench too for some repairs. :) BR, Illya

Also I am considering trades for in person meets. I will also ship. PM me for that.

I have an SC502 that I want to sell. I see an SC503 going for $500 on ebay, but as we all know, ebay really likes to inflate prices. I don't see many of these SC502s being sold so I'm not sure of a

<Raises hand> I do. I am working on a 263 at the moment. The best source for discussion I have found is the EEVBlog forum. Shaun M

To finish this thread the problem ended up being leakage from the CRT filament winding in the LV transformer. Seems I didn't "hear" Alberts description of the problem until I got an email from

Mark, Check the four zeners on the trigger board. I found mine to be open. I used BZX85B9V1. The low value tantalums were high ESR. They were replaced with film types. Mine did not trigger unless a

All my TM (usually) works very well. My ongoing projects are vintage Keithley. I have not found a Keithley forum. Do many here delve into the brown boxes? Jeff

Hi, Does anyone know if there is a way to get the PCB that Dennis Tillman used to provide for the Tek 575 Vacuum Tube Curve Tracer adapter referenced here - the one where you mod something like an

I acquired a 7904A a week ago was working very well, but yesterday the B horizontal time base (7B92A) wouldn’t trigger at all, it works perfectly in the A slot. Any suggestion on where to start

I bought a[nother] 7704A that is dirty but shows promise as it's a later S/N and has Option 9. It had blown fuses and I traced the main 4A fuse to a shorted bridge rectifier. After finding a

Thanks for the reply, Edward. The reference out is exactly -20 dBm at 100 MHz, so that's not it. At this point I doubt I'll pursue it much further, as I am using the ADALM Pluto/SATSAGEN combo to

Albert: From my first post: "But it appears the HV transformer T620 (pn# 120-199) is bad, all the voltages out of it gradually drop after running for a couple of minutes. The +500v supply voltage is

Chuck, Sorry, please forget the first line in my last post! It seems I have to read everything twice or more times to make no mistakes like reading HV where LV is written. Albert

Chuck, I must be misunderstanding something? In your first post you wrote that all voltages produced by the LV transformer gradually drop after some minutes. The 503 HV transformer is quite

Albert, Again it's not T601, the LV transformer or any of the voltages from that, that is the problem. None of those voltages drop out. ChuckA -- See Early TV at: www.myvintagetv.com