开云体育

Why? Silicone oil isn't miscible with the original oil, and you are not going to make the motor become maintenance free, no matter what you do with oils. Just give it some motor oil, thin like SAE5 or

In reply to Dennis's comment about the 1/2 scale reading. I checked the output from the input stage going into U1350 on Channel 1 and it is the same on both channels so I don't think it is in the

Yes, I know that Someday very well! ;)Jim FordSent from my Verizon, Samsung Galaxy smartphone

Folks, I am sorry that I seemed to hijack this posting but thanks for the information. I can see where a passive 50 ohm probe might have been useful in my current HP 8662A resurrection job. One place

It is a good oil, comparable to the original. It will become rancid in time just as the original did, especially if there is moisture. It is also used in hydraulic elevators as the working oil and as

Years ago I got a can of Slick 50 One Lube. It was actually a pump dispensor, not an aresol, and I've use that for similar applications. It was a nice product, still have half the can. I see that

I was told by an air-conditioner technician that Turbine oil was recommended for use in the small fans used in air-conditioners, being that it is very light. Can anyone give an opinion about this oil?

Good day to all. I recently acquired a Tek 2465BCT (GPIB option) that has some problems. The first problem is a diagnostic error on power-up: (I think) 06 02 This was displayed the first couple of

I've read some of the answers and wanted to add my two cents. We use marvel mystery oil which seems ok so far. I was thinking about using silicon based gun oil though steve

First, I would like to hear from everyone who owns a 7F10. Please reply OFF-LIST to dennis at ridesoft dot com if you own one. Next, the 7F10 is the only 7K plugin I own (I have them all) that I have

I suppose we all have our different vices...Sent from my Verizon, Samsung Galaxy smartphone

Catnip is a better way to describe it. It doesn't have the negative connotations. Dennis Tillman W7PF

Hi John, No nothing else is needed if all you want to do is be able to use the front panel pushbuttons to program the 7A16P plugin manually. If you mean is the 7A16P programmable via the 7854 GPIB

The red 3-in-1 is a perfumed kerosene diluted motor oil. It was meant for use by people who couldn't tolerate the yucky sulfur smells of oil... wanted something pretty. It was used mostly for

For this job, it is nearly perfect. It doesn't gum, and it is cheap. Is it as good as Kano??? I can't say, I have no experience with the stuff. -Chuck Harris John Griessen wrote:

There's a specific 3-in-1 that does not gum up. It comes in the blue bottle. The stuff in the red bottle will gum up and get sticky over time, the stuff in the blue bottle won't. I learned this from

And you said you don't like to brag about your collection, Dennis!This is like porn for us Tekheads!Jim FordSent from my Verizon, Samsung Galaxy smartphone

The plug ins are all usable manually in the 7854. They are not programmable (will not receive GPIB commands) through the 7854; they are programmable in the 7612 and 7912. There is a special GPIB

Do you think synthetic motor oil is as good as Kano Microil non gumming instrument oil? I'm getting low on that oil.

Is there anything needed to use a 7A16P in a 7854?