开云体育

The 2467B will go into a screen saver mode after about 5 minutes of inactivity (eg. no knob motion). It also will move the display readout positions every so often to prevent burn-in. The counters for

The 2467B and 7104 most assuredly do *not* have the same CRT! There is a good 6 inches of difference. They both have a micro channel plate (MCP) image intensifier, but they are not the same CRT. By

I believe that the last list price for that TD from Tek was $800. And that was decades ago. The only other place that diode is used, is in the 7T11 sampling timebase. So yes - read the manual.

If you haven't tried the EEV Blog Forum, you can post there too. There are some threads about the 2467B on that forum too. Best regards and wishes. Roy

Hi All: I remember something about an limiter circuit to limit the anode current, when driving the CRT hard (displaying a bright trace). That circuit was supposed to keep the maximum brightness to a

Download and read the service manual before you do anything. You didn't say what you paid for it, but if it wasn't expensive, it's probably broke. A DVM on the output probably won't hurt it if you

is there any other way I can contact or can somebody guide me whom to pm.. to ask for help

thanks a lot for the advice will follow it.

I’d bet on the tantalum, they are notorious. Regards, Stephen Hanselman Datagate Systems, LLC 3107 North Deer Run Road #24 Carson City, Nevada, 89701 (775) 882-5117 office (775) 720-6020 mobile

Hi all, I am lucky enough to have been able to visit SurplusGizmos this morning, where I found and purchased a 284 Pulse Generator. I am pleased, but wonder if anyone has advice regarding a first time

Hi All: Mostly the above seems to be ignored in this discussion... of course... it is a thread about 7000s. Just the same...and sort of on topic... if someone said to me slide over your 7404, with

Not in Califonia, but be aware that the MCP (microchannel CRT) in the 2467B has some things to think about. 1) while the bandwidth and brightness are very good, the MCP mechanism has a limited time

Mine is a model 3, with a bay for a TM504 below it. It's proudly labeled "NASA property". I don't plan on removing the sticker. It does fit the 7000 series and has the clamp for the feet. Harvey

dear members, I am from india ( just getting started into electronics as a hobbyist ) and my friend (who stays at sf bay region california) has got me a Tektronix 2467b oscilloscope (he had got a good

Hi Dave: We/I have to see a picture of that. Scopemobiles are great for say for the likes of a 465 or a 2415... but a fully stuffed 7704? Not saying it can't be done... but, can it be done for the

Something I just wanted to point out-? The cart doesn't need to be designed for the 7K series; I have one of my 7704As on a K212 scopemobile, which I think was designed for the 24xx series.? It

It's under Time & Date sub menu in the utility menu at the top of the menu. My personal guess is it ran for 4+ years 24 x 7 and was then replaced by a newer instrument in a mission critical

Thanks! I found one of the original shafts, so I might try the heat-shrink solution next. Two more questions before I break out the service manual and verify the voltages: - The graticule illium knob

Yeah, I've experienced the "grow to overflow the space" already. I'm sure I will expand to fill any space I get. My main focus is RF (the comparatively light weight of the 7904A relative to my HP 8566

Hi Dennis, Keep in mind that the 7904A timebase is not be calibrated at 200 ps/div (see the note on the front panel above the trigger source controls). The 7B15 is really intended for use in the 7104