开云体育

There isn't one of those in the concepts series. Craig

Thank you Wilson! For the detailed description of what had to come off and how to accomplish it. The additional information on how many of which IC sockets need to be replaced, and your source for

Well I already pointed out 062-0861-01, but 062-0852-01 is included in Dennis's set 062-1180-00. Craigt

And the one on strain gages... [email protected]> wrote:

Actually, it's missing more than those. Right away I noticed 062-0861-01 (Storage Cathode-Ray Tubes and Circuits) as well as 062-0852-01 (Oscilloscope Cathode-Ray Tubes) was missing. -Bob wrote:

Hi Dennis The list is missing two: 062-0861-01 Storage Cathode-Ray Tubes and Circuits Chuck Devere 062-0955-00 Television Waveform Processing Circuits Gerald E. Eastman I'm sure that was just an

To replace all the IC sockets you will need 4 8pin dip sockets 5 14pin dip sockets and 2 16pin dip sockets. They are all 2.54mm and 7.62mm, mine fit perfectly I bought mine from Newark 5 x 19M1525

http://w140.com/Tek_Transducer_Measurements.pdf

I just uploaded a paper I wrote explaining how to modify one of these unusual 3 wide TM mainframes into an ordinary TM503. It requires no parts and it takes about an hour to do. It is easy. The paler

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the [email protected] group. *File:* Unusual Three Wide TM Mainframe.pdf *Uploaded

To remove to mainboard Remove the pulse, step family, step rate, step offset, zero and aid, display and filter buttons by grabbing the sides and carefully pull while rocking left and right. Some

Hi Dave, I think the "Strain Gauge Measurements" book is actually called, or was renamed, "Transducer Measurements". I just posted the complete list of books to TekScopes. Dennis Tillman W7PF

This is the complete list of the Concept Series and Measurements Concepts Books. It includes one that was never published or assigned an internal Tek number. It is listed at the end. I have them

Thank you Wilson2115 for the 577 IC socket replacement information! Could you tell us which PC boards or other major components you did or did not remove from the 577 to? accomplish this task? Also,

I decided to perform a suggested repair on the 577 Mainboard by replacing the IC sockets that are prone to failure. The operation is complete and later when I get this instrument all together I will

Hi Michael, This cart looks to be something that I will be able to use in my yet to be built shop.? If I could just get a contractor to do the J O B.? [sigh]

https://www.harborfreight.com/500-lbs-capacity-hydraulic-table-cart-61405.html

Hi all, Managed to grab a working (somewhat) benchtop version of one of these scopes, and got it fully operational without cannibalizing my damaged-in-transit rackmount 5223. Was considering parting

Ha! Try lifting a 556 up to the bench ;-}} Chuck

Why would you add it, when it's not a "Concepts" book? (It's still a good book, but it should be on a different list.) I think that one also predates the "Concepts" series, despite the name.