开云体育

I have a RM 585A in reasonably good shap, but it won't slide more than about 1" out of the case before something on the right (CRT) side hit and prevents the scope from coming out - has anyone else

"Check them for Dielectric Absorption." Okay. So I read a bit on DAR, which I had not heard of (that I recall). Read about Dissipation, Q, and such, but not Dielectric Absorption. I understand it as

Rather coincidentally Mr Carlson, of the eponymous Lab, just posted a video on a very clean Type 130 that he owns. https://www.youtube.com/watch?v=gWSBcsWpjjE

Check them for Dielectric Absorption. Dave Wise Sent: Sunday, February 20, 2022 11:56 AM To: [email protected] Subject: Re: [TekScopes] Type 130 L-C Meter <snip> I will re-install [the original

Great comments all! I am enjoying this immensely, and some of this information is actually ever so imperceptibly leaking into my wrinkled, ancient, ossified brain. The saga of the 130 continues.

Jared, Ijust have re-read your post, it seems like you want to convert 6015 to 6015A, can you please clarify your intentions? These are different "animals" I believe that cables, comp box and tip

Jared, on my one of my 6015A R7 is 500 Ohm, Bourns 3362 cermet. clear schematics should be easily available. PM me if you want a scan off my paper manual. jon

Hi, I just picked up a P6015 HV probe and am designing a replacement P6015A compensation box as the BNC on mine is broken and I want to add Tekprobe functionality (plus allow easier adjustment with

After observing the comments and suggestions, I have to jump in here. Basically, you want your 2715 analyzer to be a 2712? Why? It is already better than a 2712. I realize the input connector is an

What's the voltage on the DLY_REF_1 line itself? Does it recover if you disconnect P511? I seem to remember cases where the bypass caps on the A1 board have gone leaky and caused issues like this.

Hi Jaap, I did reply by email. But it seems you did not get my replies. By changing to the 2712 software you mean changing the motherboard resistors so the analyser things its a 2712?

Thanks for the help. So from the replies it would better to use a min loss pad or change the complete connector.

Many thanks Siggi for the feedback. I had actually just trawled through the manual and discovered this info (I'd missed it because I didn't understand where such functionality took place). I have now

Hi Tom , I have a system and would be interested in spare cards/parts . Where are you located , I'm in the UK so post could be a real problem cost wise . regardsBrian (UK)

When does collecting old Tektronix equipment , appreciating a NOS looking and well cared for early vintage curve tracer, and collecting (repairing, restoring, learning from) old Tek gear, ever need to

Surplus acquisition and pattern generator cards for Tektronix 9100 logic analyzers. These cards are untested but are packaged in original anti-static sleeves as provided by the factory. If you have

Thanks, I'll try that. (But a paper version would be great!)

Hi David - do you have a link to the relevant tekwiki? Thanks ('m a very occasional user - so am not aware of these links).

I hate to say it but I can understand wanting a paper copy sometimes. It happened once for me about 5 years ago. On the other hand, control-F does not seem to work very well for paper copies (or

Thanks - but a paper version is a damn sight easier to use and access in this environment! Biggest issue is always the fold-out pages. Thanks for the link - will see if I can print it out.