开云体育

Go to the picture you've posted, open it in your browser. In the address field of the browser window (which changes to where you are), select and highlight the complete address. Go back to your

Hi Nenad, Your photo reminded me of a modification I made in my 7S12. See here and surrounding messages: /g/TekScopes/message/96331 I'm not sure your "morse code" problem is related

Here's a link to the album: /g/TekScopes/album?id=89499.

I have added three more close ups of the tip socket in the Photos folder here at TekScopes named "Tektronix P6202 FET voltage probe tip problem " Someone asked me in an email if I could put a link. I

Well, The copy I ordered did actually arrive in the UK today, clearly not the one in the photo but nice condition albeit without the dust jacket. It's the 3rd printing 1966 and, from writing on the

Speaking of basement shops- last summer I went to a local garage sale in a house that was built around the turn of the (last) century.? It had lots of "old house weirdness", but the strangest thing

You are in luck :) I have a 7T11 spares mule with the main timing knob intact - it is yours for the cost of postage. Would you like me to check out the cost of postage from UK to US? David

The SKU is sufficient. https://www.newark.com/tektronix/013010708/hook-tip-retractable-black/dp/92B2441?ost=013010708&ddkey=https%3Aen-US%2FElement14_US%2Fsearch

Hi David I think its only if you wish to upload---not download. Hardy -----Oprindelig meddelelse----- Fra: [email protected] [mailto:[email protected]] P? vegne af David C. Partridge Sendt: 14.

Hi Russ, What is your post referring to? It is very frustrating to have to guess. Dennis Tillman W7PF

Hi Roy, What site is being referred to? It makes it much easier if we don't have to guess what your reply refers to. By now there have been at least 50+ posts on this topic. PLEASE include some

...sorry for the way that came through [or didn't]...I had attempted to include a link to Newark's page, but perhaps sku number will be enough to get you to the correct page... Vern.

Looks like Newark sells them, though likely a bit pricier than epay:? 013010708 - Test Accessory, Retractable Hook Tip | | | | | | | | | | | 013010708 - Test Accessory, Retractable Hook

Hi Chuck, That is going to be a long shot. Try Sphere Research and vintageTEK. https://www.sphere.bc.ca/test/index.html https://vintagetek.org/ Dennis Tillman W7PF

Hi Dave, It was the Transducers Book that Tek excerpted the last two chapters and appendices into a separate "booklet". I think the booklet was intended to be a sort of application note on the use of

Hi Albert, thanks for your help and effort. all try with Readout turned off please. > I did, I uploaded a photo here: /g/TekScopes/photo/89504/0?p=Created,,,20,2,0,0 this was taken

Does anyone know a good place to get probe hook tips? I bought two sets off of epray (not the cheapest offered) and out of the 10 tips only 2 or 3 fit snugly the rest fall off. These are for P6106A

Hi Nenad, This is not what I meant. After each sampling event the 7S12 memory and vertical screen position are updated to reflect the new input signal voltage. At the same time the whole sampling

On Sun, 14 Apr 2019 16:25:25 -0400, you wrote: OK, here's how to disassemble the BNC shroud, more or less gracefully: 1) remove the cable and cable strain relief. 2) carefully remove one half of

I've put pics in a folder of the same name which show my probe and the damage I am trying to deal with. The P6202 has a different tip than other Tek miniature probes. Mine has something stuck in the