开云体育

I have used Loctite 1C to attach thermocouples to electric elements in water heaters That is high temperature and submerged in water Might work for you Paul Sent: Sunday, September 14, 2014 3:13

I picked up a slightly older HP 4262a. Sometimes you can find those or the 4261a in the $100-150 range. That's been a very nice addition to my bench. Hardly portable, though. If you want to buy

I just discovered last night that the coolant expansion tank in my wife's truck has a crack where it's leaking severely when hot and pressurized - it nearly emptied the tank in a 45 minute drive.

I usually would not change them all without an indication that one or more were worn but without something better to go on, it may be your best option.

Oops - that was supposed to read 250V.

... for the TDS6XX scopes.

Hey y'all, I've just pulled the CRT board from my TDS784D in order to see whether a re-capping will fix the CRT jitter and shearing I'm seeing from time to time. The disassembly was uneventful,

Hi, C1412 was weak and causing all of the problems. So I just ordered new caps to recap the power supply.

Hey Raymond, my apologies, I missed the crucial detail that you're looking for this for TDS680B. I'll defer to those who actually know of such things - but as these addresses for the TDS5/7XX come

Some Tek DMMs can measure capacitance. I have one & it works well. They don't make it any more but you may find one, or a Fluke-equivalent on Ebay. HankC, Boston WA1HOS

This might be worth a

WD-40, or TV tuner cleaner. I would not use dielectric grease on anything which is intended to conduct. HankC, Boston WA1HOS

This would be for measuring leakage at a specific voltage. If the LCR meter included a simple DC voltage or current range, then an add on could allow measuring leakage at a specific voltage.

Hi David, I don't quit understand. Like measuring leakage with a uA, nA meter at a certain voltage? Current? (huh? inductor core saturation? inductance .vs. current?) I got it in part to

I have had the Blue ESR meter from Anatek: http://www.anatekcorp.com/blueesr.htm for a number of years. It is easy to use and has only one button for on/off and zeroing the meter lead resistance.

The DER DE-5000 is the one I have been considering as an adjunct to my ancient impedance bridges. I want something portable for checking NOS tantalums at the local surplus electronics store. It is

I used a Tektronix 130 (ebay #121432674092) for many years and it worked well enough for me at the time. I since graduated to an HP4271A (eBay #261586194927) which is far better. Chris

I got a DER DE-5000 LCR Meter with TL-21 TL-22 TL-23 off ebay for only $82. They are well discussed on the EEVblog. Allan [Non-text portions of this message have been removed]

In many of the discussions by this Group, it is highly recommended to test capacitors (and sometimes inductors) using LCR meters. I can measure resistors with my DMM, but have no way (yet) to

If it's good for marine applications then it will last well in automotive use. All connections should be "gas tight" and try to keep them dry. If they will get wet, use dielectric grease. Don't