开云体育

Good job you found it, may have taken a while- good eye. Sent on the TELUS Mobility network with BlackBerry

Phil -- just a couple things -- you should probably replace that tant anyway. What looks like solder probably came from inside it. And the good news: .2 is the normal minimum on the 10-turn DTM pot

that is: So, not a very exciting fix but so far i have a nice working 465B but i'm NOT quite sure why :-o ok...i'm done. :-)

sorry about the voltage ripple table. it looked a lot prettier when i created it.

hi gerry, i think the problem is bigger than your email. several members have been spoofed...look at the "hello" posts...they are from several different members. phil ps. your 465 seeing the light?

i'm not sure of the best way to post this followup for all previous responders see. so, i'm replying to my original post... i spent some quality time with the new toy today. i guess it just needed

Thank you, sir!

I have never heard the term "chary" before, and thought it was a typo until it appeared more than once.? Now? that I see it's?real, is ?it a regional term, or maybe it's gone out of fashion ??

Thanks Phil!! Apparently I have been hacked and changed my password. Hope that stops it. Gerry

will the moderator please get rid of this scumbag. gerry's etc. email has apparently been cracked. guaranteed he did not send this post. and i recvd personal mail from him with the same garbage in it.

Now things are getting confusing. I decided to try the original (known good) attenuators in the 744A, and it passed SPC, but acquisition faild the self test with lots of trigger related errors. I

Hello Robert: As luck would have it, I was reminded of which vendor may be able to assist you in having those cables made. The name of the vendor is Test Parts, and they can be found using a google

Hi Alan, I also had read about the AC line-filtering caps being a weak point so I replaced them as a preventive measure when recapping the LV power supplies for my 2465A and 2467. The plastic bodies

Hi, you might know more than I do, but I have not seen any reference that the 5D10 can actually display a 100x readout coded probe. The only 5000 series scopes which can do this are the 5440 and the

Both the X2-rated 0.068uF capacitors on the mains input on my 2445A scope exploded today with much smoke and consequential panic. The part numbers at C1016 and C1018. I've read of similar failures

Hello,-- The Tektronix C1001 camera is spoken for (and in fact is on its way to the person who claimed it). My thanks go to everyone who inquired. Thanks, and 73-- Brad AA1IP

Hi Jeb, Just found this old email in my trash bin and thought I would make a couple of comments on it. Yes, Telequipment did have an official connection to Tek in the early 70's. Tek bought the U.K.

Perfect--exactly what I needed. Thanks a lot!

Hi, I will check the cable type and find out the connectors ! May be Digikey has or possibly others... I will digg ! Herbert Am 24.09.2012 05:59, schrieb dreadlk:

That's a good point, I forgot that it had to pass SPC before you could start calibration. I was thinking that the DC balance could be too far off for SPC to compensate, but that calibration might