开云体育

I have some TM-500 plugins that have been stored for a number of years in the garage in what I thought was a safe plastic storage container that is almost fully sealed from the atmosphere. To my

Hang in there Dennis, we'll try to behave. Prayers and good vibes to Marian. Vince.

Best recovery for Mrs. Marian! =D Tell her that even people far away as Brazil is wishing her a good recovery =D ---8<---Corte aqui---8<--- http://www.tabajara-labs.blogspot.com

Hi Dennis, Please convey my best wishes to Marian for a speedy recovery! --Tom -- Prof. Thomas H. Lee Allen Ctr., Rm. 205 350 Jane Stanford Way Stanford University Stanford, CA 94305-4070

Dennis, I am glad all went well. You and your family are in my prayers with special well wishes for Marian. GOD Bless and Thanks, rich!

Last Tuesday afternoon, Mar 9, for some unexplained reason Groups.io began sending me messages that emails addressed to me from the groups.io groups I belong to were bouncing. That came in to my InBox

I just checked my TM501 (Not TM501A) modules, all four of them in my collection have Q12 on the left, Q10 on the right. I also just plugged my tester module in to each and the +15 and -15 LED's lit ok

Great News! Glad it was a simple fix. Those are the best. -- Michael Lynch Dardanelle, AR

I have cleaned all the switches and viola, all nice and dandy!! Thank you guys! The only problem remains the faulty 100x divider module in the attenuator of the 2nd channel. I bought new one some time

Bruce, I had a similar experience in the mid 70's as a young design engineer. I had a multi-input ADC which was implemented with a single ADC, a S/H and a couple of multiplexers. The problem I had

Sean: If Q1197 isn't s/c it's 99% likely the drive circuitry, which at least is accessible! John

Fellow TM-500 Test Module Constructors, I've just completed assembling my TM500 test module and after plugging it into a TM501 frame for testing, found that although the 5V indicator illuminated, the

Hi Bruce, During a project as a young engineer in the early 70's I was tasked with the design implementation of a unique multi channel ADC which required input sample-and-hold blocks. Initially, for

Hi folks, I acquired some time ago 485 and finally today I managed to spend some time with it. Cleaning of the switches and moving all the controls back and forth several times brought back most

David, Take a look at the EEVBLOG two-part video at: https://www.youtube.com/watch?v=leC-zSMbtfg Dave tries to fix a TDS3054 with a single bad channel that has problems at the same sample rate

Addendum. Pictures are in album "Type W Plugin 8416-to-6DJ8 Conversion".

Second update: after further RTFM it seems that blanking of the display occurs when "the supply is neither in the constant current or constant voltage mode. This happens when the output is foldback

First update: I discoverd the switch that allows to select between front and rear panel... it has contact problems. I toggled it many times until the negative supply came up. Now it seems to work as

Oz-in-DFW, I am interested. If you have not already sold them, contact me off-list: sonodocsch@... Thanks Steve Horii

Hi all, I just started to troubleshoot my PS5010. Symptoms are a missing negative output and an erratic display when I switch on the outputs with the on/off key. The supply starts up fine, 5V and plus