开云体育

Got it from the Telogy auctions years ago and have no use for it.? No part number, but comes with v.35 cable and internal ribbon cable.? Can provide photos to interested parties (please contact me

Hi https://www.ebay.co.uk/itm/LEMO-S-SERIES-6-WAY-PLUG-FFA-1S-306-fd6j28-/121740345972 https://www.mouser.es/datasheet/2/232/unipole_multipole-973098.pdf Is 1s, 12mm, not 2s, 14,8mm Regards Miguel

https://www.ebay.es/itm/LEMO-Grose-2S-Kabel-Stecker-6-polig-FFA-2S-306/370994224213?hash=item5660fa9c55:g:WLkAAOxycmBS4-MI is this? -----Mensaje original----- De: [email protected]

LOL With *great* difficulty. That's a large part of the appeal of the project. It's not very expensive and if I succeed serious bragging rights. It would be great fun to take to a Keysight trade show

I have a Danica SV03 which is an isolated 3A variable source with V & A meters, but when you look inside it is simply a standard variable transformer with a separate isolation transformer so wouldn't

There are variacs with an isolation transformer built in. But very rare. I own one made by Philips a dutch company.

All variacs that I know of are auto-tranformers, so no isolation. David

Hi Brian, I found your post very informative but wanted to keep things as simple and clear as possible for the OP. I had recommended a Variac and he wasn't sure what to do. In his case he can either

Variacs are tapped autotransformers. No isolation. You can get an assembly that combines a variac with an isolation transformer. Some companies make a device specifically for checking leakage and

In general, no. A Variac is just a primary with an adjustable tap. Variacs with isolation exist, having their adjustable tap on a secondary winding. Raymond

/g/TekScopes/album?id=86536&p=Name,,,20,1,0,0 Updates to the photo gallery, probing the base of the 177 test fixtures reveals small parasitic spikes, I believe this is what is causing

Interesting information Brian. I have often wondered if a Variac would provide isolation also. I have never checked mine I probably should. Regards John

I was only answering to the comment about isolation transformers. If any user gets one then I hope they can check them out to be sure that they are safe instead of expecting it to work & getting

And if you do get a 2ps rise pulse generator how do you check that that is up to its spec? Roger

Thank you for the additional information. I was curious if it would be of any interesting use when I came across it by chance on ebay. I do not own any TDS series scope and upon better understanding

Brian, Let's not confuse the OP. He has a 'scope with a HV (mains switching power supply) part that is galvanically connected to the mains and a LV part that is under normal conditions separated from

With difficulty. I believe there's a method involving three sampling heads looking at each other's kickout pulses and some maths which can be used to evaluate their performance. The SD-24's pulse

John, Great find! Thanks for sharing. I’m looking forward to seeing this! https://youtu.be/3Co8Z8BQgWc A hoard of never-developed film from the Apollo 11 mission was unearthed, some of it in 70mm.

Tek content begins around 8:58. Specifically, this is part 7 of CuriousMarc's series on restoring an Apollo Guidance Computer, but the whole video (and whole series) is great. You really feel like

Debugging I2C data streams, FPGA outputs, video data outputs from graphics chips. Have a CPLD standalone board that takes apart I2C communications and drives an HP logic analyzer. Goes from time to