This may take you to some good info. Though it's hard to tell now days with
yahooo
?
?
?
?
toggle quoted message
Show quoted text
----- Original Message -----
Sent: Tuesday, September 24, 2013 8:24
PM
Subject: RE: [TekScopes] DIY High Voltage
Multiplier Thoughts or Suggestions
?
If anyone has experience de-potting a HV Multiplier I would like to hear
how
to do it. I would be willing to try de-potting a dead one I have as
an
experiment to see how hard it is and if the resulting circuit can
be
repaired.
I understand that the vendor that made the 7000
multipliers for by Tek may
have used different potting materials over the
years and that some materials
are easier to de-pot than others. So advice
on how to determine which
materials were used would be appreciated as
well.
Dennis
-----Original Message-----
From: wb5tka, Sent:
Tuesday, September 24, 2013 3:07 PM
Since it appears that high voltage
multipliers for the older scopes such as
the 465 are virtually impossible
to find, does anyone have any experience or
thoughts on building one? I've
heard of them being built and I'm willing to
give that a try but I don't
know if the multiplier in the 465 is 3X, 4X
or
whatever.
Thoughts?
Dan,
