That is exactly how I test them I made a plug from one of the extender
cards available from the video game service?people. I brought out all six
leads for the outboard power transistors so I can test them on the curve
tracer.
?
I also brought out the supplies to some load resistors so I can check
voltage and ripple on each slot.
?
?
Regards,
Tom
?
?
toggle quoted message
Show quoted text
----- Original Message -----
Sent: Wednesday, February 20, 2013 2:52
PM
Subject: [TekScopes] Re: TroubleShooting
Some TM500 gear.
?
It's an obvious idea, but instead of building a test jig into a
"blank"?plug-in
(which is probably going to be nearly impossible to
find) you could build it
seperately and connect it using the plug
available for the extension adapter
kit. I believe there are measurement
points marked on the extension edge
connector. (Not that it helps much
because that is up in the TM500 frame.)
Jim
