Re: A Way to (Sometimes) Repair Broken 22xx Knobs
|
I'll check that out. Thanks.
?
Tom
?
toggle quoted message
Show quoted text
----- Original Message -----
Sent: Sunday, February 17, 2013 12:17
PM
Subject: Re: [TekScopes] Re: A Way to
(Sometimes) Repair Broken 22xx Knobs
?
I've used E6000, a soft vinyl-based adhesive, with good success on
re-gluing buttons.
I'm
not sure which I prefer, clear silicone or E6000. ?You should have some
iof both in your kit.
73
Jim
N6OTQ
From: Tom Miller <tmiller11147@...>
To: TekScopes@...
Sent: Sunday, February 17,
2013 11:15 AM
Subject: Re:
[TekScopes] Re: A Way to (Sometimes) Repair Broken 22xx Knobs
I use RTV sillycone. Just a dab in the bottom of the knob then push it
on. Let cure for a day and you are all set. Benefit is you can still pull
the knob off in the future.
?
?
Regards,
Tom
|
