Re: 2456B whole display moved up on the CRT
|
Does this affect all four channels? If so, I would suspect a problem in the vertical output, perhaps as simple as one of the CRT neck leads ha come off, or something in the vertical chain has failed. Channel switch or vertical output hybrid.
From: allegretto2a
To: TekScopes@...
Sent: Saturday, February 16, 2013 8:17 PM
Subject: [TekScopes] 2456B whole display moved up on the CRT
?
My trusty 2465B now has a vertically offset display on the CRT. The bottom of the normal display is now at mid-point. Has anyone seen and solved this problem? Where do I look for the source of this problem?
Thanks, AL
|
