¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io

Re: TDS 744A colour shutter


 

I've been posting files to?TekScopArc2 with good results.

George

On Feb 1, 2013, at 6:20 AM, "David C. Partridge" <david.partridge@...> wrote:

?

I think you may have to sign up for the TekScopArc and TekScopArc2 and upload the file(s) to one of those (probably TekScopArc2)

The problem is that the files area of this group is full, so we need to use additional groups to hold files.

The crazy thing is that Yahoo allow 1G for images, but only a 100M for files.

Dave
-----Original Message-----
From: TekScopes@... [mailto:TekScopes@...] On Behalf Of miketakeguess
Sent: 01 February 2013 14:01
To: TekScopes@...
Subject: [TekScopes] Re: TDS 744A colour shutter

I'd be glad to do that, but I don't know how or else I don't have the correct access priveledges. I went to the files page and clicked "add files", but I get a message saying the moderator has disallowed file uploading. Is there another way to do it?

--- In TekScopes@..., "Mark Wendt (Contractor)" wrote:
>
> Mike,
>
> Might be easier to post it in the files section for the group.
>
> Mark
>
> On 1/31/2013 3:28 PM, miketakeguess wrote:
> > I had several emails for this CARTV128.bin, and I believe I responded to all. But if I missed anyone, please feel free to email me and I can send you the file.
> >
> > Mike
> > --- In TekScopes@..., Giampi Redmond wrote:
> >> Hi,
> >> the replacement of the firmware with the Mike's file (CARTV128.bin) has worked for me, it remembers the settings now.
> >> My board is a HCR-N1 V4.
> >> My original firmware, however, was different from AUTO Position.bin probably another release.
> >> Regards.
> >>
> >>
> >>
> >> ________________________________
> >> From: jayw_comark
> >> To: TekScopes@...
> >> Sent: Thursday, January 31, 2013 11:54 AM
> >> Subject: [TekScopes] Re: TDS 744A colour shutter
> >>
> >> Hi Mike,
> >>
> >> Interesting. The same seller sent me the two files you mention, and I tried both - also removing the chip from the board as you did. It didn't seem that either one fixed the problem - not even the CARTV128.BIN but perhaps there is a difference in the files we each have? If you could email me the binary you have, I'd be very grateful.
> >> Thanks!
> >>
> >> Jay
> >>
> >
> >
> >
> > ------------------------------------
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
>

------------------------------------

Yahoo! Groups Links

Join [email protected] to automatically receive all group messages.