Gerhard,
Welcome to a very exclusive club that has only 3 members that I know of.
There is no manual. There is no mention of this unit anywhere on the
internet.
This unit was not designed to be shipped. The PC boards in the back section
will snap their side rails and fall out if they are not removed and marked
with their orientation and location first before shipping. Each board is
different but nothing prevents them from going into the wrong socket or from
being put in backwards. It took me hours before I figured out where mine
PROBABLY where before I brought it back to the US in my luggage. I still
don't know for sure if I figured out their location and orientation
correctly.
I have an extensive set of pictures I took of mine which I can send you,
which I think, but I am not sure, shows the correct location of the boards.
It shows all the other curious details of the unit as well.
Dennis
toggle quoted message
Show quoted text
-----Original Message-----
From: g_kupka, Sent: Thursday, January 17, 2013 2:44 AM
Yes, I bought it. I'll get it next week.
Gerhard
--- In TekScopes@..., Stefan Trethan wrote:
Did you buy it?
I briefly considered making a 7k power supply to use as a front end
for other scopes but luckily had a bout of sanity when the auction
ended and abandoned the idea.
ST
On Thu, Jan 17, 2013 at 10:58 AM, g_kupka wrote:
Hi Egge Siert,
Do you know whether a manual exists for the Tektronix 6 Unit Power
Supply?
best regards
Gerhard
