They look good. Is this the direct output of the printer or is there an intermediate step to getting the final part?

I remember that stereolithography output was far too fragile to use directly so it was used to make a mold.

Do the 3D parts resist well? Can you stand the scope on end?

--- In TekScopes@..., "Rob" wrote:
>
> I as well can attest that the feet turned out great. I bought and put them
> in service on a 7834 and TM-503 both of which benefited greatly as I like
> this cord wrap design far and above the originals they came with.
>
>
>
> From: TekScopes@... [mailto:TekScopes@...] On Behalf
> Of George Lydecker
> Sent: Thursday, January 03, 2013 5:48 PM
> To: TekScopes@...
> Subject: [TekScopes] Re: Rear feet for 475
>
>
>
>
>
> Gang,
>
> Here are some pictures of the 3D printed feet Tim created;
>
>
>
> I am very happy with the results.
>
> Goerge
>
> --- In TekScopes@... , Jim
> wrote:
> >
> > I would add -- Tim was kind enough to send me one of his prototypes so I
> could use it to make a mold, and compare my castings from his prototype vs.
> an original foot that Tom Jobe sent me.
> >
> > I owe both of them some preliminary samples as soon as I find the time to
> make molds and cast something.
> >
> > Fortunately, I'll have a whole lot more time in my shop during the next
> two weeks. A bunch of unplanned projects finally concluded in the last
> couple of days.
> >
> > 73
> > Jim N6OTQ
> >
> >
> >
> > >________________________________
> > > From: Glydeck
> > >To: "TekScopes@... "
> > >Sent: Thursday, January 3, 2013 5:13 PM
> > >Subject: Re: [TekScopes] Rear feet for 475
> > >
> > >
> > >
> > >I bought some and they work great. I plan on posting some pictures, but
> have not got around to it. Tim's Email address is;
> > >
> > >
> > >lemonscentedmoisttowelette@
> > >
> > >George
> > >
> > >On Jan 3, 2013, at 2:14 PM, Paul Amaranth wrote:
> > >
> > >
> > >
> > >>I saw him offering those on ebay along with the handle endcaps.
> > >>
> > >>they look very nice. Search for tektronix feet and it should
> > >>come up.
> > >>
> > >>On Thu, Jan 03, 2013 at 07:56:09PM -0000, Gerald Krizek wrote:
> > >>> Does anyone know if the fellow that was trying to 3D print rear feet
> for the Tek 475 has had any success? I seem to have lost his e-mail address.
> > >>> Thanks,
> > >>> Jerry
> > >>>
> > >>
> > >>--
> > >>Paul Amaranth, GCIH | Rochester MI, USA
> > >>Aurora Group, Inc. | Security, Systems & Software
> > >>paul@ | Unix & Windows
> > >>
> > >>
> > >
> > >
> > >
> > >
> > >
> >
>