I watch the reruns every Saturday night on MeTV.
73
Glenn
WB4UIV
toggle quoted message
Show quoted text
At 08:23 PM 1/2/2013, you wrote:
Where else could one post the phrase "Danger
Will Robinson Danger" with the expectation that
a majority of the audience would understand the reference?
On 1/2/2013 5:36 PM, Rob wrote:
With the talk about magnets, etc. I started
thinking (Danger Will Robinson Danger)¡
Perhaps judicious application of heat to the
pin/neck may get the two pieces closer together as well.
As a word of warning (for lack of better
wording). I would be a bit concerned on the
neon transformer idea (not a technically based
or engineering rigorous concern)¡. the solution
if it works will be one that is low enough in
current to tack the two together but not melt
the heater/other parts in the process. A high
voltage on a cap ¡°sounds right¡± where a
transformer supplying constant current ¡°sounds wrong¡± for what that is worth.
Anyway, I wish you both good luck and hope you do get¡¯er done.
Rob
From:
<mailto:TekScopes@...>TekScopes@...
[mailto:TekScopes@...] On Behalf Of Tom Miller
Sent: Wednesday, January 02, 2013 4:20 PM
To: <mailto:TekScopes@...>TekScopes@...
Subject: Re: [TekScopes] Re: Tek 154-0812-00 Storage CRT
If you get anyway near Belair, give me a yell
at 443-250-6381. I have some old neon sign
transformers that may do just right. We could
dummy it up in the garage and see if the tab can be deformed.
Tom
----- Original Message -----
From: <mailto:mark.wendt@...>wendtmk
To: <mailto:TekScopes@...>TekScopes@...
Sent: Wednesday, January 02, 2013 4:09 PM
Subject: [TekScopes] Re: Tek 154-0812-00 Storage CRT
--- In
<mailto:TekScopes@...>TekScopes@...,
"baltimora86" <<mailto:acuffe@...>acuffe@...> wrote:
--- In
<mailto:TekScopes@...>TekScopes@...,
Mark Wendt <mark.wendt@> wrote:
Interesting. How much of a gap did you
have between the pin and the strap?
Noticed your email handle. Are you located in Baltimore, MD?
Mark
It was about 10 years ago, but it was a
fairly large gap (something like 1/16").
I'm located in Austin, TX.
Andy
Sounds fairly close in width to mine, gap-wise.
Bummer. I live about 40 minutes away from Bal'mur, in southern MD. ;-)
Mark
