The pictures on that website shows the three numbers and the red dot I am talking about very well. The numbers on mine are all different but the same in any plug-in. They are 304, 706 and 902 (as I recall from memory so may not be 100% correct). Does anyone know what these 3 numbers printed on the top with the red dot mean? and do those numbers matter for substitution or just the 140-0034-xx? I am assuming that the ¨Cxx is like most Tektronix parts where they are equivalent upgrades from the original -00 then -01, etc. Is this the case?
?
I may also try the repair shown on the website unless I find I can swap relays. I now have a 7A12 that is only good for parts. Because the front panel knobs were forced in through the pots inside in shipment or some such. They are not repairable so I am just going to part that one out. Making all of its relays available for the other two.
?
Thanks again for the bandwidth and any comments/insight.
From: TekScopes@... [mailto:TekScopes@...] On Behalf Of magnustoelle Sent: Sunday, July 22, 2012 2:14 PM To: TekScopes@... Subject: [TekScopes] Re: A question of Relays
?
Hi,
Taking the risk to bore some others:
Some repair details and useful photos on Tek relais 0148-0034-00 can be found on Ralf's homepage here: ? This is a different version from your -01, but shall be helpful anyway.
The page is in German, but your favourite on-line translator shall help.
