Let us not forget that not all terminations are equal. I will take example
of few terminations that Tek supplies:
011-0049-01 is good up to 500 MHz, then 011-0099-00 good probably to 250 MHz
and then precision (0.1%) 011-0129-01 is good up to 100 kHz (that is kilo,
not a typo).
Probably ranking behind Tek is Pomona then comes Pasternak, then Radio Shack
...
I suggest to try your terminator on a TDR, a reflectometer and your target
cable; quality of termination shows real good.
Regards
Miroslav Pokorni
toggle quoted message
Show quoted text
-----Original Message-----
From: dd@... [mailto:dd@...]
Sent: Monday, July 09, 2001 9:15 AM
To: TekScopes@...
Subject: [TekScopes] Re: Sources for Terminations
>I believe that a question did come up somewhere concerning
where one
>could buy an in-line termination. Besides the obvious
expensive
>source (), I believe you can get them
from Pomona
>Electronics (the makers of cables and adaptors) and you
might see if
>Mini-Circuits carries them.
Deane Kidd sells Tek 011-0049-01 feedthrough terminators for
about $10
when he has them.
Probemaster has one, model 1055, that sells for about $33.
They tend to turn up in scope cart drawers and probe pouches
- often you
can buy a scope cart for less than the value of the drawer
contents :-)
To unsubscribe from this group, send an email to:
TekScopes-unsubscribe@...
Your use of Yahoo! Groups is subject to
