Hello:
I need to verify the wiring to the fan on the Tek 453 which I just
acquired as first scope. Works fine, but fan bearings were dry. Got it
going but cannot verify with certainty the solder points for the green
and black fan leads. There is a broken solder point at the forward most
of two contacts just to the left as viewed from the front. Behind this
is another contact where blue and blue/white are soldered.
I am assuming (no manuals yet) that green and black leads broke off
from the front most contact. Naturally, I would like to verify this
before re-soldering.
Any help is greatly appreciated.
John