Hi Don,
The Service Manual for the TAS465 is part number 070-8524-01. I have a copy
of one in my workshop (not for sale).
The only problem being is that I live in Sydney, Australia.
Best Regards,
Andrew Campbell
toggle quoted message
Show quoted text
-----Original Message-----
From: donlcramer@... [mailto:donlcramer@...]
Sent: 08 May, 2001 02:12
To: TekScopes@...
Subject: [TekScopes] Looking for 465B parts
Hello all,
My first post to this very interesting newsgroup, so I hope this message
makes it out ok.
I would like to acquire any of the following parts for a standard 465B. My
scope was rescued from the dumpster (!) and is completely refurbished save
one each from this list:
PN 131-1428-00 CONTACT,ELEC:GROUNDING CLIP Bottom board HV shield
to "can" contact.
PN 352-0263-00 HLDR,POUCH ASSY: Blue plastic piece at
the front top of the "can".
PN 378-0044-01 FILTER ELEM,AIR:2.5 X 2.5 X 0.25 Air filter element.
The plastic pouch holder piece is the most important to me. Anyone out
there parting out a 465B, perhaps with an otherwise unuseable can?
Next question has to do with a different animal altogether, a Tek TAS 465.
I will probably regret combining these two instruments in one email due to
the confusion over the shared numeric designator. I have acquired (another
"free to a good home") broken TAS 465 100MHz 2ch analog scope and with it
came an instruction manual (070-8523-03). This manual has very limited
service info. I would like to confirm if a separate service manual exists?
Would anyone have one to sell? I've tried the usual manual sources (except
Tek). The serial number on this scope is BR10900. I know that sounds odd,
but that's what is on the label. Would anyone also know what "BR"
signifies in the serial number? Perhaps it wasn't made in Beaverton....
Thank you.
Don
To unsubscribe from this group, send an email to:
TekScopes-unsubscribe@...
Your use of Yahoo! Groups is subject to
