On May 22, 2025, at 14:12 , Rogerio O via groups.io <rodd414@...> wrote:
I was thinkin to start with the easiest issue (2) which would require spraying a little of Deoxit Fader on the pot's wiper but, to my surprise, it seems impossible to get there
see (/g/TekScopes/album?id=302608).
I'd try taking the knobs off and spraying Faderlube down the shaft before disassembling it, and I'd also try that from the exterior and see if it'll wick through any gaps.
For garbage and missing values in readout, don't forget your vertical and horizontal plugins. I've had more problems with those causing missing/wrong readout due to dirty/damaged cam switch contacts. YMMV.
Adam
