Greetings from Louisiana!
I have had several damaged shipments of the SC502, SC503, SC504 scopes. The Slope / Level switch-pot is damaged along with the knob. In a similar way the Volts/Div and Time/Div knobs were broken. In one case the shafts on all 3 knobs were broken. I decided to have shafts built in plastic and 316L Stainless steel. I took the original knob with the printed skirts and drilled out the original shaft and replace with the custom shafts I designed and had manufactured. The plastic shafts are as good as the original, and the 316L stainless steel shafts are far better than the original.
I am also working on having the skirts manufactured out of 1/16" acrylic and printed with UV Ink.
So now for the question(s)...
1) Does anyone have any SC502, SC503, SC504 knobs with broken shafts that need to be repaired. I can provide the shafts or repair your broken shaft.
2) Does anyone need new skirts for SC502, SC503, SC504.
So far I have restored several of these scopes (more than 10). Initially I got plenty of help / suggestions from the group. Many thanks for that.
Regards,
Barry
