As far as I am aware ALL tm500 plugins can be used in tm5000 modules but
tm5000 and not be used in the tm 500 frames.
One not of caution there are some special tm5000 modules that only support
1 device.
Eric
toggle quoted message
Show quoted text
On Wed, Feb 14, 2024, 1:13 PM Andy Warner <andyw@...> wrote:
I can confirm that SG503s are capable of running quite happily in TM5000
enclosures.
On Wed, Feb 14, 2024 at 11:09?AM Jared Cabot via groups.io <jaredcabot=
[email protected]> wrote:
I have a couple of the SG503's, both older and newer versions. I'll stick
them in a TM500 and TM5000 mainframe and take some measurements in the
next
few days.
I had one that had a faulty crystal which meant the display didn't work
(The crystal only runs the display, the output is generated separately
with
analogue RLC networks etc). I replaced it with this part and all is well
again.
Also, if your unit has Texas Instruments IC sockets, you need to replace
them. They are notorious for going bad. I replace them on sight with good
quality circular pin types.
Jared.
--
Andy
