David, Albert,
I rechecked the voltages, this time with the correct settings, and they are still exactly the same.
I also checked all the waveforms to be expected on the ¡°GENERATOR¡± schematic.
All waveforms are perfect until I get to R99 (600¦¸). From this point and everything beyond (to the right), zilch. Flat as a pancake. Which was to be expected since there is no output.
Q54 is fine. For good measure I replaced it temporarily. Same results.
Although the TP voltages are all fine, I¡¯m seriously considering recapping the power supply¡ again.
At this point, I don¡¯t know what else to do.
What do you think?
