Which one is Q510? I see 2 Q500s but no Q510. Of course it could just be me.
Vince.
toggle quoted message
Show quoted text
On 07/20/2021 08:48 PM, Zentronics42@... wrote:
I have uploaded the schematic that I have drawn up in Kicad in the files section. Given the new information for Q500 and Q510 I think I will need a different part in CR511. I need to figure out how to make Kicad do a PCB edge connecter. But here is the work so far. Since I am still in the schematic phases and have not started laying down foot prints I need to decide thru hole or SMD construction. The transistors will be SOT-23 so they are SMD.
Zen
-----Original Message-----
From: [email protected] <[email protected]> On Behalf Of GeorgeP
Sent: Tuesday, July 20, 2021 6:05 PM
To: [email protected]
Subject: Re: [TekScopes] Recreating an old board for the 7854
On Tue, Jul 20, 2021 at 01:13 PM, <Zentronics42@...> wrote:
When the design is checked and tested If there is any interest in
these let me know. Not sure how many out there want to tackle a full cal of a 7854.
I am interested. Thanks!
--
Michigan VHF Corporation -- nobucks dot net
K8ZW -
