Ren¨¦e and Harvey,
The scope still has it's emergency spool of silver solder, apparently unused, but I also bought three 0.35 oz coils of Kester 62/36/2 silver solder when I was working on the 475 or 475A HV sections a few months ago.
When you say "high heat" Ren¨¦e, what temperature are we talking about? I already replaced one blown resistor in the LV section, and I used my old Weller iron (the kind with the magnetic tips that you have to change to select the temperature). It was not easy to do, but I think some of that was because I did not clean the area very well before applying the heat. I also have a surface mount rework station with a soldering iron attached, and it allows me to adjust the temperature with a dial. What temperature should I be using on the ceramic strips?
I'm was already planning to test all the electrolytic cans, so testing the axial leaded caps is only a little more work. I'm glad that mylar caps will do as replacements, as I already happen to have a good supply of those that I have been using on some EICO instruments.
-- Jeff Dutky
