Sorry, Dennis, wrong question before. what is the spacing of the three pins and are the spacing angles 120¡ã? Or, what pattern?
The datasheet at DigiKey does not come up.
Larry
toggle quoted message
Show quoted text
On 3/3/2021 11:02 AM, Dennis Tillman W7pF wrote:
Hi Dave,
These are the ones I use with their corresponding DIgiKey and Mouser part numbers:
Mill-Max Part Numbers
917-93-103-41-005000 CONN TRANSIST TO-5 3POS GOLD
0552-2-15-01-11-27-10-0 CONN PIN RCPT .015-.020 SOLDER
0552-2-15-15-11-27-10-0 CONN PIN RCPT .015-.020 SOLDER
All three of these are still available from DigiKey.
Mouser Part Numbers
575-055220 Mill-Max 0.015-.022¡± pin, 0.170¡± deep, for small transistors & small in-line pkgs.
575-0293015 Mill-Max 0.022-.034¡± pin, 0.170¡± deep, for TO-66 transistors
575-031400 Mill-Max 0.032-.046¡± pin, 0.236¡± deep, for TO-3 transistors & large in-line pkgs.
Only two are available now from Mouser.
Dennis Tillman W7pF
-----Original Message-----
From: [email protected] [mailto:[email protected]] On Behalf Of Dave Peterson via groups.io
Sent: Wednesday, March 03, 2021 10:34 AM
To: [email protected]
Subject: [TekScopes] PCB sockets for plug-in xtors/etc.
Is there a resource for the sockets that are soldered into the PCB boards in scopes with plug-in transistors, ICs, diodes, etc.?
Dave
--
Best wishes,
Larry McDavid W6FUB
Anaheim, California (SE of Los Angeles, near Disneyland)
