On Fri, Jan 29, 2021 at 05:54 PM, Torch wrote:
I can't see any sign of a set screw. Unless it is hidden under the mounting
nut.
Hi, not sure who you're replying to, but in case it's me (regarding the similar issue on my 2465):
On the 2465, there is no nut for the BNC. Rather, there is a 'collar' that includes a set-screw, and it is only accessible when the attenuator module is removed. I think (not sure) that if the set screw were removed, then the BNC would either slide out or screw out of the attenuator frame.
In my case, the set screw was tight, and the only thing I could see to give mechanical support to the center conductor was the solder joint.
Pete
saipan59 (Pete)