Or a ham-fisted Jim Ford with some oversized wire cutters hacking around. Just sayin'.
Jim
toggle quoted message
Show quoted text
------ Original Message ------
From: "Roy Thistle" <roy.thistle@...>
To:
[email protected]Sent: 6/4/2020 7:19:06 AM
Subject: Re: [TekScopes] TLA711 Benchtop controller schematic needed
On Thu, Jun 4, 2020 at 12:53 AM, Egge Siert wrote:
In my experience it is nearly impossible to damage through-hole connections in
Multi-Layer Boards.
Hi Egge, Hi All:
Trust me, with a Mr. Carlson Weller soldering gun special, and a Hexagon 100Wer... people do it to Tek stuff, all the time.
Best regards and wishes.
Roy
