Good Morning,
I have the following probe tips
3.5mm
Tip-tail - Part Number - Qty on hand
Natural-Grey - 206-0389-01 - 6ea
Blue--Yellow - 206-0440-00 - 7ea
Black-red - no p/n - 8ea
Grey-Blue - 206-0392-00 - 13ea
Black-Blue - no p/n - 1ea
Brown(could be funky red)-natural - no p/n - 3ea If red then p/n 206-0416-00
2.5mm
Clear-Clear - 206-0265-13 - 5ea (NOS), 8ea(pull)
Clear-Blue - 206-0265-10 - 20ea (NOS), >20ea (pull)
Yellow-Blue - no p/n - 2ea
Clear-Clear - 206-0265-13 - 8ea (pull)
Brown-Red - no p/n - 10ea
Clear-Yellow - 206-0265-12 - 8ea
196-2963-00 - P6469 Lead set
174-0976-00 - P6101 probe cable 2ea NOS
6106 probe body
131-4997-01 - Probe tip
131-4353-00 - PCB to probe adapter - 20ea
"clip" style grounds - >20ea
"ring" style grounds >20ea
015-0540-00 - Cable for P6501 - 1Ea
175-9411-00 - cable - 1ea
174-0976-00 cable 1ea
174-0971-00 - 2ea
010-0361-00 P6046 10X Attenuator
Sorry for the bandwidth but I though the group of tek collectors might like the inventory. There are other hard to describe easily spares also
Contact off list if interested
Steve
toggle quoted message
Show quoted text
-----Original Message-----
From:
[email protected] <
[email protected]> On Behalf Of jgkolek@...
Sent: Saturday, October 5, 2019 11:31 AM
To:
[email protected]Subject: Re: [TekScopes] P6139a with broken tip
Hi,
I just posted a new query elsewhere on this board with similar thoughts: can I use a CT3667 (206-0441-00 equivalent) used in P6139A to replace a 206-0378-00 used in a P6137?
Regards,
JGK