I think I'm going to paste this note inside my 2465, just in
case I forget how to get it off.
I think I'll print it in red, maybe 30pt type :-)
Paul
toggle quoted message
Show quoted text
On Mon, Aug 05, 2019 at 09:30:10AM -0400, Chuck Harris wrote:
OMG!!!
I surely hope you haven't followed any of these suggestions!
It is easy, loosen the nut, do not let the screw turn,
level the nut with the screw slot, tap it with a tiny
hammer, and it will fall off.
The screw is not threaded into the impeller. It is purely
there to pull the collet into a taper that is inside of the
impeller. The nut does the pulling.
DO NOT ALLOW THE SCREW TO TURN!!!
DO NOT yank, pull, or pry on the impeller.
-Chuck Harris
--
Paul Amaranth, GCIH | Manchester MI, USA
Aurora Group of Michigan, LLC | Security, Systems & Software
paul@... | Unix & Windows
