After repair, I would suggest a short extension cable left attached to the equipment, so all plugging/inplugging stresses are moved to the end of the extender.
Jophn
toggle quoted message
Show quoted text
On 5/3/2019 6:28 AM, cheater cheater wrote:
I have a piece of equipment where a trace was lifted. The part is still
attached and I would like to glue it down. The part is a socket for a
cable, and the plug is difficult to insert and remove. I will have to
solder the other pin which is the ground plane, and broke off, so the glue
has to survive that. I'll also need to add some structural solder on the
sides. Is cyanoacrylate a good idea here? Anything better than that? Thanks.
